Starts from the Best Quality

A MEMS (Microelectromechanical Systems) Accelerometer is a small, sensitive device that measures acceleration and inclination. It consists of a mass attached to a spring, which is suspended in a fixed position within a microelectromechanical system (MEMS) device. When the device is subjected to acceleration, the mass moves due to the force of the acceleration, causing the spring to deflect. The deflection of the spring is measured by a sensor, which converts the movement into an electrical signal. This signal can then be used to calculate the acceleration of the device. MEMS accelerometers are commonly used in a variety of applications, including automotive safety systems, sports and fitness tracking devices, and mobile phones.

MEMS Capacitive Accelerometer MAS3012 1

MAS3012

Single/Dual/Triaxial MEMS Capacitive Accelerometer Sensor, ultra-low noise: 1ug, dynamic range: 110dB, widely used in vibration monitoring, etc.

  • Closed Loop Structure MEMS Capacitive Accelerometer
  • Range: ±2g, ±5g, ±10g, ±30g, Excellent Bias Stability
  • Dynamic Range: ≥110dB,
  • Bandwidth: MAS3012-2 ≥1KHz (Typical Value, -3dB)
  • Low Noise: MAS3012-2≤1.0μgrms/√Hz
  • Non-linearity: 0.1%FS (Full Range)
  • Extremely Reliable in Harsh Environment
  • Wide Operating Temperature Range: -40~+85ºC
analog mems accelerometer MAS1000H

MAS1000H Analog Mems Accelerometer

high performance single/dual/triaxial analog mems accelerometer, low noise, dynamic range: 110dB, suitable for seismic monitor, vibration monitoring, etc.

  • Single/Triaxial MEMS Capacitive Accelerometer
  • Range:±2g/±3g, Excellent Bias Stability
  • Output: Differential Output / Single-Ended Output
  • Dynamic Range: ≥110dB, Bandwidth (-3dB): 200Hz
  • Low Noise: ≤2.5μgrms/√Hz
  • Non-linearity: 0.1%FS (Full Range)
  • Extremely Reliable in Harsh Environment
  • Wide Operating Temperature Range: -40~+85°C
Low Cost 3 Axis Digital MEMS Accelerometers DMA08 1

DMA08

Low cost 3 axis digital MEMS accelerometers with ±8g range, widely used in motor monitor and vibration monitoring.

  • Low Cost 3 Axis Digital MEMS Accelerometers
  • Range: ±8g, Bias Stability: < 5mg, Resolution: 0.5mg
  • Multiple Interfaces: RS232 or RS485 Modbus
  • Non-linearity: ≤ 0.2%FS
  • Up to 200Hz Data Refreshing Rate (can support 1kHz)
  • Wider Input Voltage: 5~30VDC
  • High Reliability in Harsh Environment
  • Wide Operating Temperature Range: -40~+85ºC
Triaxial MEMS Capacitive Accelerometer MAS3008 1

MAS3008

Tri-axial MEMS accelerometer sensor, high performance, it is an ideal option for seismic monitor, vibration monitoring, high speed train/metro train, etc.

  • Triaxial MEMS Capacitive Accelerometer
  • Range:±2g, Excellent Bias Stability
  • Dynamic Range: ≥110dB, Bandwidth (-3dB): 200Hz
  • Low Noise: ≤2.5μgrms/√Hz
  • Non-linearity: 0.1%FS (Full Range)
  • Output Mode: Differential Output
  • Wide Operating Temperature Range: -40~+85°C
  • Size: 38.5*35.5*21mm
accelerometer module

MAS3009 seismic accelerometer

Single axis MEMS seismic accelerometer, low Noise: ≤1.5μgrms/√Hz, dynamic range: 110dB, widely used in machine health monitoring, etc.

  • Single Axis MEMS Capacitive Accelerometer
  • Range: ±2g/±3g, Excellent Bias Stability
  • Dynamic Range: ≥110dB, Bandwidth (-3dB): 1000Hz
  • Low Noise: ≤1.5μgrms/√Hz
  • Non-linearity: 0.1%FS (Full Range)
  • Extremely Reliable in Harsh Environment
  • Wide Operating Temperature Range: -40~+85°C
  • Size: 19.8*19.8mm
seismic accelerometer sensor

MAS3015

Single axis MEMS accelerometer sensor, specially designed for seismic monitor and vibration monitoring.

  • Close-loop Structure MEMS Capacitive Accelerometer
  • Range:±2g/±3g/±5g/±30g, Excellent Bias Stability
  • Input Voltage: MAS3015A: 7~36V, MAS3015B: 4.75~5.25V
  • Output: Differential Output / Single-Ended Output
  • Wide Operating Temperature Range: -40~+125°C
  • Small Size: 15*15mm
  • Close-loop Structure MEMS Capacitive Accelerometer
  • Range:±2g/±3g/±5g/±30g, Excellent Bias Stability
  • Input Voltage: MAS3015A: 7~36V, MAS3015B: 4.75~5.25V
  • Output: Differential Output / Single-Ended Output
  • With Temperature Sensor
  • Wide Operating Temperature Range: -40~+125°C
  • Small Size: 15*15mm
mems accelerometer MA1000 1

MA1000

High-performance closed-loop capacitive accelerometer, range:+-2g/3g, High stability, widely used in seismic monitor, structure health monitor, etc.

  • Range: ±2g/ ±3g, excellent bias stability: 0.05mg
  • Output: differential output/single-ended output
  • Single power supply: 4.75~5.25V
  • Bandwidth (-3dB): 1000Hz
  • Low Noise: ≤1.2μg/√Hz (@100Hz), fully calibrated
  • Embedded temp. sensor& precision reference voltage
  • Extra small LCC20 package (9.0mm x 9.0mm)
  • Wide operating temperature range: -40~+125°C
seismic accelerometer

MA1000A

High end closed-loop MEMS accelerometer chip, specially designed for vibration measurements: seismic monitor, micro-vibration monitoring, etc.

  • Range: ±2g~±30g, Excellent Bias Stability
  • Output: Differential Output / Single-Ended Output
  • Very Low Noise: 1.2μg/√Hz for ±2g Range (typical)
  • Input Power Supply: 4.75~5.25V
  • Embedded Self-Test Function and Temperature Sensor
  • Embedded Precision Reference Voltage
  • Shock Survivability: 6000g, Vibration Resistance
  • Wide Operating Temperature Range: -40~+125°C
MAS3012 Triaxial MEMS Capacitive Accelerometer

MAS3012 Triaxial MEMS Capacitive Accelerometer

– Closed Loop Structure MEMS Capacitive Accelerometer

– Range:±2g, Excellent Bias Stability

– Dynamic Range: ≥110dB,

– Bandwidth: ≥1KHz (Typical Value, -3dB)

– Low Noise: ≤1.0μgrms/√Hz,Non-linearity: 0.1%FS (Full Range)

– Extremely Reliable in Harsh Environment

MAS3002 Triaxial MEMS Capacitive Accelerometer

MAS3002 Triaxial MEMS Capacitive Accelerometer

– Triaxial MEMS Capacitive Accelerometer

– Range:±2g, Excellent Bias Stability

– Output: Differential Output / Single-Ended Output

– Dynamic Range: ≥100dB, Bandwidth (-3dB): 200Hz

– Low Noise: ≤2.5μgrms/√Hz

– Non-linearity: 0.1%FS (Full Range)

– Extremely Reliable in Harsh Environment

– Wide Operating Temperature Range: -40~+85°C

MAS1012 Single Axis MEMS Capacitive Accelerometer

MAS1012 Single Axis MEMS Capacitive Accelerometer

– Closed Loop Structure MEMS Capacitive Accelerometer

– Range:±2g, Excellent Bias Stability

– Dynamic Range: ≥110dB

– Bandwidth: ≥1KHz (Typical Value, -3dB)

– Low Noise: ≤1.0μgrms/√Hz

– Non-linearity: 0.1%FS (Full Range)

– Extremely Reliable in Harsh Environment

– Wide Operating Temperature Range: -40~+85ºC

MAS100X-1

MAS1002 Single Axis MEMS Capacitive Accelerometer

– Single Axis MEMS Capacitive Accelerometer

– Range:±2g, Excellent Bias Stability

– Output: Differential Output / Single-Ended Output

– Dynamic Range: ≥100dB, Bandwidth (-3dB): 200Hz

– Low Noise: ≤2.5μgrms/√Hz

– Non-linearity: 0.1%FS (Full Range)

– Extremely Reliable in Harsh Environment

– Wide Operating Temperature Range: -40~+85°C

3-axis-digital-MEMS-accelerometer-DMA08

DMA08 Series Low Cost 3 Axis Digital MEMS Accelerometers

– Low Cost 3 Axis Digital MEMS Accelerometers

– Range:±8g, Bias Stability: < 5mg, Resolution: 0.5mg

– Multiple Interfaces: RS232 or RS485 Modbus

– Non-linearity: ≤ 0.2%FS

– Up to 200Hz Data Refreshing Rate (can support 1kHz)

– Wider Input Voltage: 5~30VDC

– High Reliability in Harsh Environment

– Extremely Reliable in Harsh Environment

– Wide Operating Temperature Range: -40~+85ºC

seismic accelerometer

MA1000A High Performance MEMS Capacitive Accelerometer

  • Range:±2g~±30g, Excellent Bias Stability
  • Output: Differential Output / Single-Ended Output
  • Very Low Noise: 0.9μg/√Hz for ±2g Range (typ)
  • Embedded Self-Test Function and Temperature Sensor
  • Shock Survivability: 6000g, Vibration Resistance
  • Wide Operating Temperature Range: -40~+125°C

REQUEST A QUOTE