MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer

– Cost Effective Z Axis MEMS Gyro with Temp. Output

– Heading: Diverging 0.1°/hour

– Range: Gyro ±300°/s, (ODM Supported)

– Fully Calibrated and Error Compensation

– Wide Input Power Range: 5~18VDC

– Compact and Light Weight: 50*45*21mm, 70grams

– High Survivability in Harsh Environment, IP67

– Wide Working Temperature: -40°C~+85°C

Brief Introduction

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer is composed of one Z axis MEMS gyro and 3 accelerometers, which provides accurate heading direction and accelerations, MGA2000 is a miniature factory-calibrated module to provide consistent performance through the extreme operating environments.
MGA2000 offers a highly-effective solution for cost-sensitive demanding applications. It adopts advanced MEMS components, which reduces the cost deeply. The system enjoys small size and light weight, it is widely applied in AGV, Robotics Control, Platform Stabilization, etc.

Technical Specifications

– Cost Effective Z Axis MEMS Gyro with Temp. Output

– Heading: Diverging 0.1°/hour

– Range: Gyro ±300°/s, (ODM Supported)

– Fully Calibrated and Error Compensation

– Wide Input Power Range: 5~18VDC

– Compact and Light Weight: 50*45*21mm, 70grams

– High Survivability in Harsh Environment, IP67

– Wide Working Temperature: -40°C~+85°C

Typical Application

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer is a low cost MEMS sensor which provides accurate heading direction and accelerations, it has been widely used in the following fields:
– Robotics
– AGV
– Industrial Control
– Platform Stabilization
– Antenna Pointing

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in robotics
MEMS gyros are small, inexpensive sensors that measure angular velocity. The units of angular velocity are measured in degrees per second (°/s) or revolutions per second (RPS). Angular velocity is simply a measurement of speed of rotation.
SkyMEMS MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer is cost effective MEMS gyro sensor, which is widely used to balance a robot, the MEMS gyroscope can be used to measure rotation from the balanced position and send corrections to a motor.

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in AGV
AGV is an automated guided vehicle or automatic guided vehicle, which is a mobile robot that follows markers or wires in the floor, or uses vision or lasers. They are most often used in industrial applications to move materials around a manufacturing facility.
MEMS gyro can provide low cost solution for AGV to finding direction, MGA2000 MEMS gyro enjoys low cost, high performance, it has been widely used in AGV applications.

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in Satellite Antenna Pointing
Stabilized antennas are key for dynamic communication – they have to remain pointed at the satellite in order to ensure a constant flow of data, with regulations stating that an accuracy better than 0.5 is essential to maintain an active transmission.
These requirements highlight the need for precise, highly accurate measurements for altitude and angular rate. This means that the antenna has to receive input from at least one orientation sensor in order to respond to changes in vehicle orientation. MGA2000 is an ideal selection for satellite antenna pointing, it has been widely used in this field applications.

Product Advantages

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer is a low cost MEMS sensor which provides accurate heading direction and accelerations, it has been widely used in the following fields:
– Robotics
– AGV
– Industrial Control
– Platform Stabilization
– Antenna Pointing

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in robotics
MEMS gyros are small, inexpensive sensors that measure angular velocity. The units of angular velocity are measured in degrees per second (°/s) or revolutions per second (RPS). Angular velocity is simply a measurement of speed of rotation.
SkyMEMS MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer is cost effective MEMS gyro sensor, which is widely used to balance a robot, the MEMS gyroscope can be used to measure rotation from the balanced position and send corrections to a motor.

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in AGV
AGV is an automated guided vehicle or automatic guided vehicle, which is a mobile robot that follows markers or wires in the floor, or uses vision or lasers. They are most often used in industrial applications to move materials around a manufacturing facility.
MEMS gyro can provide low cost solution for AGV to finding direction, MGA2000 MEMS gyro enjoys low cost, high performance, it has been widely used in AGV applications.

MGA2000 Single Axis MEMS Gyro with Triaxial Accelerometer widely used in Satellite Antenna Pointing
Stabilized antennas are key for dynamic communication – they have to remain pointed at the satellite in order to ensure a constant flow of data, with regulations stating that an accuracy better than 0.5 is essential to maintain an active transmission.
These requirements highlight the need for precise, highly accurate measurements for altitude and angular rate. This means that the antenna has to receive input from at least one orientation sensor in order to respond to changes in vehicle orientation. MGA2000 is an ideal selection for satellite antenna pointing, it has been widely used in this field applications.

FAQ

Q: How long is the delivery time of the products?
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 1~2 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.

Q: If needing to do the customer-oriented design product, what procedures will be followed?
A: If you want to do the customer-oriented design product, please contact with our pre-sale technical support engineer, or enter our ODM service in www.skymems.com, and write down the technical requirements online, our engineers will contact with u asap after we get your requirements. Then we will clarify the technical specs together, and confirm the customer requirements together, then start to do the sample developing.

Q: How about the payment conditions?
A: we accept 30% prepayment in advance, and the balance 70% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.

Q: How long is the product warranty?
A: Usually, our product warranty is one year. If you want to have longer warranty period, please contact with your sales manager to buy longer warranty service. Our products enjoy very high quality, and its MTBF is more than 100000hours.

Q: How will we do if the product has the quality problem?
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.

Q: What fast express will be adopted during shipping?
A: we will select fast expresses such as DHL, UPS, FEDEX, TNT etc. according to customer’s requirements.

REQUEST A QUOTE