Starts from the Best Quality

the smallest China ECB100 3 Axis Compass from manufacturer, provides accurate heading and tilt readings, easy to be integrated, widely used in antenna pointing, buoy, laser rangefinders, etc.

• Smallest Size: 16.5*16.5*6.5mm
• 3D Angle (Heading, Pitch, Roll) Output
• Heading Accuracy: 0.8° RMS (25°C, Tilt Angle<30°)
• Pitch and Roll Accuracy: ±0.1° (25°C, Full Range)
• Hard/Soft Magnetic Compensation, Tilt Compensation
• Support User Calibration
• Power Supply: 3.3±0.3VDC, Interface: LV-TTL
• Widely Working Temperature: -40~+85°C

– 常温零偏稳定性≤ 0 .01 °/h (1 0秒平滑，固定温度点测试)

– 全温零偏稳定性≤0.05°/h

– 常温零偏重复性≤0.01°/h (固定温度点)

– 全温零偏变化：≤0.05°/h (-40—+60℃)

– 测量范围：-300°/s—+300°/s

– 标度因数非线性度≤10ppm

– 带宽≥200Hz

– 工作温度：-40~+60ºC

– Super High Performance Digital Fiber Optic Gyro

– Higher Accuracy, Lower Noise and Greater Efficiency

– Zero Bias Stability ≤ 0 .01 °/h (Normal Temperature)

– Zero Bias Stability at Full Temperature ≤0.05°/h

– Measuring Range: -300°/s~+300°/s

– Scale Factor Non-linearity ≤10ppm

– Bandwidth ≥200Hz

– Working Temperature: -40~+60°C

– High Performance Digital Fiber Optic Gyro – Higher Accuracy, Lower Noise and Greater Efficiency – Zero Bias Stability ≤ 0 .1 °/h (Normal Temperature) …

– High Performance Digital Fiber Optic Gyro – Higher Accuracy, Lower Noise and Greater Efficiency – Zero Bias Stability ≤ 0 . 2 °/h (Fixed …

– High Performance Single Axis Fiber Optic Gyro – Higher Accuracy, Lower Noise and Greater Efficiency – Zero bias stability < 0.2°/h – Dynamic range …

• Super high accuracy inclinometer, Accuracy: ±0.001°, Range from ±5° to ±30°,
• Low Temp Drift, With Temperature Compensation
• Temperature Coefficient: ±0.0003°/°C
• Multiple Output interfaces: RS485, RS232, RS422,Voltage, Curent Output
• Wide Voltage Input:11~36V, IP67 Sealed
• Wide Working Temperature: -40°C~+85°C

• Single/Dual Axis Measurement, Range from ±5° to ±15°
• Accuracy: ±0.01° (room temperature)
• Temperature Coefficient (-20~50 °C): ±0.0004°/°C
• Output interface: RS485, Modbus Protocol
• Wide Voltage Input:11~36V, IP67 Sealed
• Wide Working Temperature: -40°C~+85°C

• Single/Dual Axis Measurement, Range from ±5 to 360°
• Accuracy: ±0.01°, Zero Point Drift: ±0.002°/°C
• Low Temp Drift, Optional Temperature Compensation
• Output interfaces: RS485, RS232(Optional)
• Wide Voltage Input:11~36V, IP67 Sealed
• Wide Working Temperature: -40°C~+85°C

• Single/Dual Axis Measurement, Range from ±5° to 360°
• Accuracy: ±0.05°, Zero Point Drift: ±0.002°/°C
• Low Temp Drift, Optional Temperature Compensation
• Multiple Output interfaces: RS485, RS232, RS422, Voltage Output, Curent Output Options
• Wide Voltage Input:11~36V, IP67 Sealed
• Wide Working Temperature: -40°C~+85°C

• Single/Dual Axis Measurement, Range from ±5 to ±15°
• Accuracy: ±0.1° (room temperature)
• Temperature Coefficient (-20~50 °C): ±0.001°/°C
• Output interface: RS485, ModBus Protocol
• Wide Voltage Input:11~36V, IP67 Sealed
• Wide Working Temperature: -40°C~+85°C

• Low cost inclinometer with high performance, IP67 Sealed
• Single/Dual Axis Measurement, Range from ±5° to 360°
• High Accuracy: ±0.05° (Digital), ±0.1° (Analogue)
• Low Temp Drift, Optional Temperature Compensation
• Multiple Output interfaces: RS485, RS232, RS422, Voltage, Curent Output
• Wide Working Temperature: -40°C~+85°C

• Low cost inclinometer with high performance, IP67 Sealed
• Single/Dual Axis Measurement, Range from ±5° to 360°
• High Accuracy: ±0.5°
• Low Temp Drift, Optional Temperature Compensation
• Multiple Output interfaces: RS485, RS232, RS422, Voltage, Curent Output
• Wide Working Temperature: -40°C~+85°C

Low-cost dual axis tilt sensor, with RS485 Modbus interface, widely used in solar tracker system, work in harsh outdoor environment.

• Single / Dual Axis Measurement, Range: ±90°
• Accuracy: ±0.2° (room temperature, 25°C)
• Output Interface: RS485, ModBus RTU Protocol
• Wide Voltage Input: 5~36V
• Compact and Lightweight: 50 x 36 x 16mm, 23grams
• IP67 Sealed, Suitable for Outdoor Applications

• 3D Angle Output (Heading, Pitch, Roll)
• Hard/Soft Magnetic Compensation, Tilt Compensation
• Heading Accuracy: 0.3° RMS (25°C, Tilt Angle<30°)
• Pitch and Roll Accuracy:±0.1° (25°C, Full Range)
• Wider Input Voltage: 5~24VDC (up to 36VDC)
• Interface: RS232 (default) or RS485

• 3D Angle Output (Heading, Pitch, Roll)
• Hard/Soft Magnetic Compensation, Tilt Compensation
• Heading Accuracy: ±2° RMS (25°C, Any Tilt Angle)
• Pitch and Roll Accuracy: ±0.1° (25°C, Full Range)
• Wider Input Voltage: 5~24VDC (up to 36VDC)
• Wide Working Temperature: -40~+85°C